Opening installation security
The PBX Security page protects the entire installation and its clients. It is reserved for the global administrator role with system read rights. System write access is required to change settings. The former security entry leads to this page.
The sections are Overview, IP Addresses, Firewall, Country Access, SIP Protection, Anti-Fraud, Support Access, and Log. Draft settings share Save and Cancel. Switching sections keeps the input; leaving the page prompts you to handle it. The result is shown per section. Immediate commands retain their own effect.
Reading the overview
Start with the protection status and points to fix. Rerun analysis requests a new examination; while Analysis in progress… is shown, wait for the result. The cards open the relevant tab. Links to accounts, clients, or call profiles allow you to address the issue in its original screen.
Direct fixes require confirmation. Review the proposed change, confirm to apply it, or cancel to keep the settings. A successful analysis is not proof that all points have been fixed: review each status. The Backups and services: system status link opens their monitoring.
Managing addresses and bans
Banned (auto) shows automatic blocks. Blocked and Allowed show explicit rules. Search for an address and, in the bans, filter by reason: excessive traffic, authentication failures, scanning tool, or other.
| Field | Purpose | Possible values | Example |
|---|---|---|---|
| IP or network (CIDR) | Designate the source; required | Valid address or network | Your office's address |
| Label | Identify the rule | Text | Main office |
| Type | Classify an allowance | Office, SIP Operator, Administration, Other | Administration |
| Duration | Set a block duration | 1 hour, 24 hours, 7 days, Permanent | 24 hours |
In Actions for a banned address, Unban lifts the ban, Permanently block prepares a lasting block, Allow prepares an allowance. In the explicit lists, Remove removes the allowance and Unblock removes the block.
Some actions require Confirm this action?: your own address, a conflict with an allowance, or a very large network. Read the exact scope. Removing the allowance for your session or blocking its address may cut off your access. Cancel if the target is not the intended one.
More actions offers Import CSV file and Export as CSV for the relevant lists. After import, read the number accepted and the lines skipped: a partial import is not a complete import. An unreadable ban source is reported separately; it does not mean no address is banned.
Setting the firewall and confirming access
The firewall decides who can reach each service. Before restricting it, check legitimate sources in Access and Bans.
- Read Exposed Services, their ports, and their current policy.
- Modify the proposed access for each service and the firewall activation.
- Check Your Address. Not Allowed opens the addresses to fix.
- Click Save. Cancel discards unapplied changes.
- In the confirmation, check the Add your address to allowed addresses option; it is offered to preserve your session's access.
- If connections risk being cut off, read the list and the additional confirmation before proceeding.
- After applying, click Confirm, I'm still connected within the banner's time limit.
The rollback mechanism waits for this confirmation for sixty seconds. Without it, the previous rules are restored. A message indicates the rollback; do not consider the new rules as saved. If the application fails, the screen displays the reason and the actual state must be re-read.
Local Services are shown separately from exposed access. The country link for a service opens Country Access, but a geographic rule only acts if the services use it and if the firewall is active.
Checking the network
Check firewall launches a network check. While Check in progress… is shown, wait for its result. In More Actions, Deep check opens the detailed tests; Hide deep check collapses them.
In the deep check, Run check creates a new measurement. Read each service, port, usage, required or optional status, and result. A warning about the router's SIP helper may offer Copy instructions. Copy report copies the diagnostic; Download as PDF exports it. The history allows you to open a previous check by clicking its date.
A check does not apply the firewall rules. A read error can be retried with Retry; a failed copy or PDF must be retried after reading the message.
Restricting access by country
These countries are those of the originating IP addresses of connections, notably SIP. To allow or block countries for called numbers, use Call Profiles: this is a separate setting.
Two policies are kept separate: Telephony and Administration Interface.
| Field | Purpose | Possible values | Example |
|---|---|---|---|
| Protection active | Enable the relevant policy | Switch | Telephony active |
| Rule | Define the filter direction | Allow only these countries; Block these countries | Allow only these countries |
| Countries | Define the selection | Searched countries or shortcuts Switzerland, Switzerland + neighboring countries, EU/EFTA | Countries of your sites |
| Geolocation database | Read the source's freshness | Up to date, outdated, missing or unmeasured | Last update date |
An allow list must contain at least one country. Save examines the impact; if registered devices or connections would be blocked, Block these devices? indicates the affected accounts. Confirm only after verification or cancel to correct the selection. Then follow the firewall confirmation banner when it appears.
The text under the policy indicates the services it applies to. Firewall opens their settings. The geolocation database is attributed to DB-IP; its status and date should be checked in case of unexpected location.
Setting SIP protection
SIP is the call signaling protocol. SIP Protection allows you to enable its defense, adjust detection, and set ban durations.
| Field | Purpose | Possible values | Example |
|---|---|---|---|
| Protection active | Enable detection | Switch | Enabled |
| Number of requests / Request observation duration | Detect excessive traffic from an address | 5 to 10,000 requests over 1 to 60 seconds; integers | Recommended server values |
| Number of failures / Failure observation duration | Detect repeated attempts from an address | 2 to 100 failures over 1 to 1,440 minutes; integers | Recommended values |
| Block scanning tools | Recognize known scanning tools | Switch and displayed list | Enabled |
| Initial duration | Set the first duration | 1 to 1,440 minutes; integer | Recommended value |
| Double the duration on each recurrence | Extend successive bans | Switch | Enabled |
| Maximum duration | Cap the doubling | 1 to 720 hours; shown if doubling is active | Recommended value |
| Recurrence alert | Offer a permanent block beyond the threshold over seven days | 2 to 50 bans; integer | Recommended value |
Restore recommended values reloads the proposed values into the draft. Then click Save to apply them. An empty or out-of-range entry blocks saving and identifies the field. If "The maximum duration must be at least equal to the initial duration." appears, increase the cap or reduce the initial duration, accounting for units. The status distinguishes saved settings from their actual application; wait for the applied status to be confirmed.
Configuring outbound anti-fraud
Anti-fraud rejects calls exceeding thresholds or targeting blocked destinations. Emergency calls are excluded from these blocks.
| Field | Purpose | Possible values | Example |
|---|---|---|---|
| Anti-fraud active | Apply the policy | Switch | Enabled |
| Simultaneous external calls | Per-client threshold | 1 to 100,000, or empty for no limit | Threshold suited to the contract |
| Simultaneous international calls | Per-client threshold | Same range, or empty | Threshold approved for the team |
| International calls per hour | Per-user threshold over a rolling hour | Same range, or empty | Value suited to activity |
| Risky destinations | Block the chosen categories | Premium-rate numbers, satellite/international networks, high-risk destinations | Necessary categories |
Save applies the draft; Cancel restores the loaded values. In exceptions, search for the client and open their modification. An empty threshold falls back to the global rule; zero means no limit for that client; other values go up to 100,000. Choose the exceptionally allowed categories and the Allowed Prefixes, separated by commas, from 1 to 8 digits with or without a plus sign.
Apply prepares the exception in the panel's settings; then review the changes and save the whole. Resume global settings removes the client's exceptions. Client's call profiles opens restrictions specific to that client, separate from the installation policy.
Authorizing support
In Support Access, set administration and server access separately. These commands take effect immediately. Disabling requires confirmation; Cancel keeps the authorization. Check the applied or pending status of SSH access. The support access guide specifies the scope and rights.
Connecting SNMP and Prometheus monitoring
Open System → Alerts and External Monitoring → SNMP. SNMP provides read-only metrics over UDP 161. Choose the version and allowed sources, then save.
| Field | Purpose | Possible values | Example |
|---|---|---|---|
| Version | Choose the protocol | SNMP v3 or v2c | v3 |
| User | v3 identity | Name configured for the monitoring system | supervision |
| Authentication | Protect the v3 request | SHA-256 / AES or SHA / AES | SHA-256 / AES |
| Passwords | v3 authentication and encryption | At least 8 characters; empty keeps the existing value | Monitoring secrets |
| Community | v2c secret | Value kept if left empty | Secret intended for the collector |
| Allowed addresses | Restrict collectors | IPv4, IPv6, CIDR networks separated by spaces, commas, or lines | Monitoring network |
| Contact / Location | Identify the installation | Text | Network team / Main site |
Version v2c transmits community and data without encryption. Exposed values provides the OID mappings, identifiers of metrics to use in your collector. A rejected validation shows "Check the addresses and secrets (8 characters minimum).".
The Monitoring — Prometheus / Grafana panel allows activation, source restriction, and copying the metrics address. Open System → Alerts and External Monitoring → Prometheus / Grafana. The Allowed addresses (optional) are saved by the common Save button. Activation and token generation are immediate. Generate new token replaces the key; Copy preserves it before Close, which hides it. Refresh the collector after renewal. The Documentation and resource links open the help provided by the installation.
Viewing the log and checking results
In Log, choose type, period, and IP address. Validate the search; an invalid address must be corrected. Pages browse the results. Export (CSV) exports events according to the filters and becomes unavailable during export or when there are no results.
After a protection change, check the saved status then the applied status, access from your session, and new events. For a read error, use Retry on the relevant panel. Do not remove rules at random to make an error disappear: pass on the exact message and the attempted change to the installation administrator.
