A call profile authorizes or blocks outbound destinations. Open General Settings, then Call Profiles and the desired profile. A record address without an identifier returns to the list.

You must have read access to profiles and write access to modify them. The record distinguishes Settings, Destinations, and Applied To; the links under the header lead to these sections.

Understanding the Scope

View of the section in light mode, fictional client, personal data and secrets hidden.

The profile can target the entire client, a person, a ring group, or an outbound route. Department assignments are also managed within departments. Within a set of prefixes, the most specific one takes precedence; with equal length, a direct rule takes precedence over a profile rule.

A number dialed with + and a number dialed with 00 may fall under different rules. Test the dialing formats actually in use.

Creating, Copying, and Configuring a Profile

  1. From the list, click New Call Profile.
  2. Enter the name and identifier.
  3. Choose a Blank Profile or Copy from an Existing Profile.
  4. Without copying, optionally choose Allowed Countries Only or Blocked Countries, then the countries. Otherwise, choose the corresponding behavior without a prefix. Click Create.
  5. In the record, adjust the settings, then Save.
Field Purpose Possible Values Example
Name Visible label; required at creation Non-empty text National Calls
Identifier Required technical reference Identifier suggested from the name, adjustable national-calls
If no rule in this profile matches Default decision Block or Allow Block
Countries Template suggested without copying; selection required for a per-country template Allowed Countries Only or Blocked Countries; multiple countries France (+33), Switzerland (+41)
Override Code Override secret Leaving it empty retains the existing code; the code is never displayed again Enter a validated code
Available to Users Enables profile availability Toggle Enabled

Actions → Duplicate creates a copy with its saved rules. Review the copy before assigning it; an unsaved draft is not a shared definition.

The Save button in the header saves the prepared settings, destinations, and assignments. Cancel discards them. Complete or cancel a pending line before saving the record; a partially successful write remains in effect.

Defining Destinations

In Destinations, click Add. Choose the call family to allow or block. The client's country is displayed in the record: it is used to distinguish national from international calls.

Field Purpose Possible Values Example
Numbers Concerned Destination family; required All National, All International, Country, premium-rate numbers, or Prefix Country
Country Selected destinations; shown for Country, at least one required One or more countries from the catalog France, Switzerland
Action Decision for this destination Block or Allow Allow
Label Optional marker Text Sales Team

Confirm the line with Add, then save with Save in the header. Cancel in the line discards its entry. Edit prepares replacement of a destination. Delete requests confirmation then prepares removal; save the record to apply it.

For a precise exception, choose Prefix and fill in the details:

Field Purpose Possible Values Example
Prefix Start of the called number; required for this choice Digits, +, * or # only +41
Number Length (optional) Restricts the rule to a specific length Integer from 1 to 32, or empty Value validated for your dialing plan

The most specific prefix rule takes precedence. Review the default decision after a removal.

Selecting Destination Countries

In Destinations, click Add, then choose Country in Numbers Concerned. Select one or more countries: the list displays their name and dialing code. International / Satellite Networks is a separate entry. Choose Block or Allow, then confirm the line with Add and the record with Save. An empty selection prevents saving; Cancel discards the addition. The selector remains unavailable until the list has loaded. If loading fails, reload the screen before continuing.

At creation, both templates add a block on premium-rate numbers:

  • Allowed Countries Only allows the selected countries and blocks other international destinations. Ordinary national calls remain allowed by default: this template is therefore not an exclusive list of all reachable countries.
  • Blocked Countries blocks the selected countries and allows other destinations by default, excluding premium-rate numbers.

A profile created from a template remains disabled until all its rules have been saved. If saving fails, check the record before making it available.

For applicable rules, the decision order is: explicit prefix, premium-rate block, country, national or international category, then default action. Allowing a country therefore does not lift the premium-rate block; an explicit allow via prefix still takes priority. Country-based rules do not apply to internal calls. Emergency calls are never blocked by these restrictions.

+1 does not include the Caribbean in country selection: their regional codes are recognized separately. Select the desired territories. An explicit +1 prefix, however, retains its scope over all numbers starting this way. If an international range is shared among several territories, blocking just one is sufficient; allowing requires all possible territories.

These countries designate the destination of the called number. In Security → Access by Country, the filter applies to the source IP address of connections, notably SIP, and not to dialed numbers.

Assigning and Removing

In Applied To, choose the scope and its Target, then Apply. This command prepares the assignment; Save in the header saves it. A scope without read access to its catalog does not allow selecting a target. The entire client cannot be assigned a second time.

Stop applying to … opens confirmation for removing this assignment; then save the record. Delete the profile removes the profile for all announced targets. Cancel if you only want to remove one assignment.

Exceptions for the Client or a Person

From the list, Exceptions for the Client or a Person, then Add Rule allows you to enter the prefix, action, scope, and a label. A direct rule targets the entire client or a person. Edit prepares an update; Delete requests confirmation. Confirming an exception writes the rule directly; Cancel closes its entry without applying it. If the directory is not readable, the existing scope is retained and cannot be changed.

Warning

An active call profile assigned without any rules blocks ordinary outbound calls, even if its default action appears permissive. Check the rules before assigning it. Emergency numbers are still handled separately.

Verifying the Result

Check the profile and its targets after saving. Have allowed and blocked calls verified, with expected dialing formats and a destination without a matching prefix.

If It Doesn't Work

"This call profile no longer exists." requires returning to the list. A read error confirms neither an empty list nor the counters. Also check direct rules, personal profiles, and department profiles before modifying a shared profile.