Preparing the installation

This guide is intended for the installer of a new Informatique Facile PBX system. It describes the five-step wizard provided by the /setup page. Ask your integrator for the exact address of the wizard served by your installation: the dedicated boot screen may differ from this page. If the system is already running, use Login.

Since version 2026.10.97, a fresh installation on an empty database quickly initializes the database from a reference schema shipped with the version, instead of replaying the entire history. This acceleration does not change the wizard steps. Updates to an existing installation remain unchanged: all missing steps are applied.

Prepare the domain name, the key provided for this installation, the network addresses validated by your integrator, the country, the timezone, and the administrator account. A fully qualified domain name, called FQDN, is an address such as telephone.example.test, without https:// or a path. DNS is the service that links this name to a network address.

On opening, Checking installation status… precedes the form. Reload relaunches the page. If the system is recognized as already configured, the page redirects you to login. During Checking…, the fields are disabled: do not submit multiple requests.

First-installation wizard, current step and five visible steps.

Step 1 — FQDN

Field Purpose Possible values Example
Fully qualified domain name (FQDN) System address; required Full name, at most 253 characters, without protocol or path telephone.example.test, example to replace with your domain
  1. Enter the name validated with your integrator.
  2. Click Continue.
  3. Correct the entry if the format is rejected.

The format check does not confirm that the name points to the server. Certificate configuration and accessibility will be verified during final application.

Step 2 — License key

Field Purpose Possible values Example
License key Authorizes the installation and unlocks the following steps The key provided for this installation; do not fabricate one Paste the key received from your supplier
New license key, if offered Loads the license associated with an offline installation key Compatible license key provided by your integrator Paste the second key received
  1. Paste the License key.
  2. Click Continue and wait for it to be verified.
  3. If a second key is requested, enter it, have it verified, then read the summary of clients, quantities, and expiration before continuing.

The interface may accept separators in a standard key; the check detects an incorrect entry before submission. A well-formed key may nonetheless be rejected by the licensing service.

Warning

Do not publish the key in a screenshot or message. If the response is uncertain after applying, have the installation and license status verified before trying again.

Empty license entry; no usable key.

Step 3 — EULA acceptance

The EULA is the end-user license agreement.

  1. Click Read the EULA — version {version}; the displayed version is the one received from the service. The agreement opens in another tab.
  2. Read this version.
  3. If you accept it, check I have read and accept this version of the EULA..
  4. Click Continue.

The checkbox is unchecked by default. Without an available version or explicit acceptance, this step cannot be validated. Previous returns to the license step.

Agreement version, read link, and unchecked acceptance checkbox.

Step 4 — Network and location

NAT here refers to an installation behind a router that translates addresses. Use the settings confirmed by your integrator.

Field Purpose Possible values Example
Network mode Indicates how the server is accessible; required NAT — behind a router; No NAT — public access; No NAT — local network NAT — behind a router
IP address of the box interface Local listening address; required Valid IPv4 or IPv6 address 192.0.2.10, documentary example
Router public IP address Address announced externally; shown in NAT mode Valid IP address; required in NAT 198.51.100.10, documentary example
Installation country Sets the numbering plan; required A country from the list received from the server The actual country of your installation
Client timezone Dates the business hours; required A timezone offered for the selected country Europe/Zurich if offered for your country
  1. Choose the network mode; Choose corresponds to no selection.
  2. Enter the interface address and, in NAT mode, the router address.
  3. Choose the country. The timezone field then appears.
  4. Choose the timezone. If only one exists for the country, it is selected automatically. Changing the country clears the previous selection, unless a single timezone can be offered.
  5. Click Continue.

Local network mode uses an internal certificate authority. The address format does not prove accessibility. Previous returns to the agreement step without applying the configuration.

Network mode, documentary addresses, country, and timezone.

Step 5 — Creating the administrator

Field Purpose Possible values Example
Administrator username Identifies the initial account; required 3 to 64 characters; letters, digits, period, hyphen, or underscore; first character must be a letter or digit; no @ camille.admin
Password Secret required by this version of the wizard 12 to 1,024 characters A confidential personal passphrase
Notification e-mail (optional) Notification address Valid simple address, at most 254 characters, or empty field camille@example.test
  1. Fill in the account identity.
  2. Check previous steps using Previous if needed.
  3. Click Validate and apply only once.
  4. Wait for the response. All steps are rechecked, and invalid input may return you to the relevant step.

The application configures the network and certificate, verifies the license, and records the consent. If the service requires e-mail activation while this screen asks for a password, have your integrator verify the wizard's compatibility. Do not attempt to bypass a refusal.

Administrator creation with a fictitious username and no visible password.

Verifying the result and using the recovery link

After confirmation, you are normally redirected to login. If Installation complete, but the activation e-mail was not sent. appears, immediately open the displayed recovery link to choose your password. This link is for single use, and the text indicates a thirty-minute validity, with the expiration time when available.

  1. Open the recovery link and complete activation.
  2. Return to the wizard.
  3. Click I have chosen my password — go to login after actually choosing your password.

Do not leave this screen before using or confidentially forwarding the link. If it has expired, request a new activation from the integrator.

Result with fully hidden recovery link and return-to-login command.

If it does not work

Displayed message Solution
"Enter a complete FQDN, without protocol or path, over which you have DNS control." Correct the domain name and remove the protocol and path.
"Invalid key: check the entry or request a key from your supplier." Re-enter the key provided for this installation or have it verified.
"Expired key: request a renewal from your supplier." Request a renewal.
"Review the provided EULA and explicitly accept this version to continue." Return to the agreement step, read it, and check acceptance if you agree.
"Enter the IP address of this box's interface." Have the address confirmed, then correct this field.
"Choose the client's timezone: it will date its business hours." Select a timezone from the list after choosing the country.
"The administrator password must contain between 12 and 1024 characters." Follow the length requirement shown on this screen.
"The name … does not point to this box in the public DNS." Create or correct the indicated record with your DNS host, or correct the domain name if it was misentered. Wait for propagation, then click Retry. The name is checked before license activation: the license remains available for the new attempt.
"Installation not confirmed: have the box's status verified before retrying." Stop retrying and request verification from the integrator.

A message regarding a missing configuration service, a timeout, an unavailable agreement, or an unreadable response should be forwarded to the integrator, without the license or activation link. Some diagnostics contain technical names specific to the server: keep the original message in your private communication.

Next is Login, then Clients.